Is Arduino pro mini 3.3V 5V logic tolerant ?

No and yes, at your own risk.

You can run the whole board on 5V, but that has to be done at the VCC pin (With an external regulated power supply) not the RAW pin, it will still run on an 8Mhz clock (The resonator is 8MHZ, you can’t change that without changing the resonator), and you will lose the voltage regulator (Since it is 3.3v) and use an external one.

Why can’t i, i hear you cry, the answer is simple, the CPU’s reference voltage is 0-3.3V when running on the built in regulator or 3.3V, if you step the voltage up on VCC to 5V regulated, and disconnect RAW altogether, and don’t care about the lower speed, then there you have it, it should work.

If any of my 3.3V Arduino boards gets fried this way, I will let you know, but for now this works for me.

Leave a Reply

Your email address will not be published. Required fields are marked *